Feuling - Oil System Pack

09320029.png
09320030.png
Screen Shot 2017-10-07 at 2.01.15 PM.png
09320029.png
09320030.png
Screen Shot 2017-10-07 at 2.01.15 PM.png

Feuling - Oil System Pack

from 799.95
  • Combine all the needed components to finish your T/C® engine's oiling system
  • Available in either HP+® or Race Series® kits
  • These kits increase oil pressure, oil volume, engine oil flow and return oil scavenging, eliminating wet sumping and oily air cleaners; test results show 25-35 degree cooler engine temperatures, 15-30 degree cooler oil temperatures, 15-30 more lbs of oil pressure and quieter smoother engine operation; results also show a substantial increase of oil pressure and 3 H.P. and 4 ft/lbs. of torque to the rear wheel
  • Both HP+® and Race Series® kits include Feuling's® HIGH FLOW billet cam plate made from 7075 aluminum which is 50% harder and stronger than the factory, SE® and other aftermarket cam plates; Feuling® increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the cam plate to the port holes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings
  • HP+® Series kits include a billet 6061 aluminum high-volume oil pump, Feuling® HIGH FLOW cam plate, HP+® Hydraulic roller lifters, gaskets and o-ring kit
  • Race Series® kits include a billet 7075 hard anodized oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances under temperature; Race Series® hydraulic lifters have a full .200" of total travel designed with a slower bleed-down rate to handle heavy valve spring pressures, increase engine RPM before valve float and feature increased roller clearance for steep-ramped camshafts; kits include a Race Series® oil pump, Race Series® lifters, high flow cam plate, gaskets and o-rings
  • Conversion cam plate kits PART #s 0932-0071 and 0932-0072 utilize the early-style 99-06 camshafts and upgrade the cam chain system to use the late-style 07-17 hydraulic tensioner system; 'factory' sprockets, tensioners, chain and hardware sold separately

NOTE: 99-01 models with Magneti Marelli ignition require rear cam sprocket

NOTE: Part # 0932-0035 is for use w/ PART #’s 0932-0027/0028 When Using 99-06 Chain Drive.

COLOR:

  • Natural
  • Red

DRIVE: Gear

FINISH: Anodized

MADE IN THE U.S.A.: Yes

MATERIAL:

  • Aluminum
  • Steel

MODEL:

  • HP+®
  • Race Series

PACKAGING: Each

SPECIFIC APPLICATION: Yes

STYLE: Performance Replacement

TYPE:

  • Cam Plate
  • Gasket Kit
  • Lifter Set
  • Oil Pump Kit

Applications:

Part # 0932-0035, 0932-0027, 0932-0028, 0932-0069, 0932-0071, & 0932-0072: 

2005 15th Anniversary Fat Boy-Injected Model, 2005 - 2006 Deluxe Models, 2000 - 2006 Deuce Models, 1999 - 2005 Dyna Models, 1999 - 2006 Electra Glide Models, 2000 - 2006 Fat Boy Models, 2000 - 2006 Heritage Models, 1999 - 2006 Road Glide Models, 1999 - 2006 Road King Models, 2000 - 2006 Softail Models, 2006 Street Glide Models

Part # 0932-0029 & 0932-0030:

2011 - 2013 Blackline Models, 2013 - 2017 Breakout Models, 2008 - 2011 Cross Bones Models, 2007 - 2017 Deluxe Models, 2007 Deuce Model, 2006 - 2017 Dyna Models, 2007 - 2017 Electra Glide Models, 2007 - 2017  Fat Boy Models, 2012 - 2017 FLS Slim Models, 2015 - 2016 Freewheeler Models, 2007 - 2017 Heritage Classic Models, 2007 - 2013 & 2015 - 2016 Road Glide Models, 2007 - 2016 Road King Models, 2008 - 2011 Rocker Models, 2007 - 2010 & 2016 - 2017 Softail Models, 2007 - 2016 Street Glide Models, 2009 - 2016 Tri Glide Ultra Classic Models, 2015 - 2016 Ultra Limited Low Models

Model:
Quantity:
Add To Cart