Terry Components - STARTER MOTORS

Screen Shot 2018-03-27 at 3.29.30 PM.png
Screen Shot 2018-03-27 at 3.27.00 PM.png
Screen Shot 2018-03-27 at 3.34.07 PM.png
Screen Shot 2018-03-27 at 3.33.35 PM.png
Screen Shot 2018-03-27 at 3.33.43 PM.png
Screen Shot 2018-03-27 at 3.27.08 PM.png
Screen Shot 2018-03-27 at 3.33.25 PM.png
Screen Shot 2018-03-27 at 3.33.58 PM.png
Screen Shot 2018-03-27 at 3.34.19 PM.png
Screen Shot 2018-03-27 at 3.34.51 PM.png
Screen Shot 2018-03-27 at 3.29.30 PM.png
Screen Shot 2018-03-27 at 3.27.00 PM.png
Screen Shot 2018-03-27 at 3.34.07 PM.png
Screen Shot 2018-03-27 at 3.33.35 PM.png
Screen Shot 2018-03-27 at 3.33.43 PM.png
Screen Shot 2018-03-27 at 3.27.08 PM.png
Screen Shot 2018-03-27 at 3.33.25 PM.png
Screen Shot 2018-03-27 at 3.33.58 PM.png
Screen Shot 2018-03-27 at 3.34.19 PM.png
Screen Shot 2018-03-27 at 3.34.51 PM.png

Terry Components - STARTER MOTORS

from 358.95
  • Nippondenso starters are assembled in the U.S.A. with heavy-duty components and tested with state-of-the-art equipment
  • Solenoid plunger, return damper and springs are replaced with stronger components
  • Clutch shaft and rollers are replaced with precision-ground and hardened parts for longer service life
  • All components are assembled with a special lube for starter roller clutch applications
  • CNC-machined billet mounting noses are held together with aerospace fasteners
  • After assembly, all starters go to a dyno test including hi-low voltage, stall torque, solenoid engagement, amperage draw, load test, maximum rpm and motor impulse wave form
  • Starters have a 4.4:1 gear reduction and produce 46% more cranking torque than the stock starter
  • Starters available in four kilowatt ratings (1.2, 1.4, 1.6 and 2.0)
  • The 1.6 kW starter is designed for 96" or bigger motors with limited size batteries such as FXR, FXST and FXD models
  • The 1.2/1.4/1.5 kW starters are designed for OEM applications; use Terry battery cables and a battery with 300+ cranking amps like the Drag Specialties battery for best results
  • The 2.0 kW starter will start any monster motor (for best results, use with Terry battery cables and a battery with 300+ cold cranking amps like the Drag Specialties battery)
  • Choose from two finishes: black wrinkle or polished/chrome
  • Made in the U.S.A.

Applications:

Part # 2110-0249 & 2110-0250

For 07-17 Twin Cam & 06 Dyna Glides (except 17 Dressers)

Part # DS-196030, DS-195153, DS-196190, DS-196186, 2110-0507, DS-196034, & DS-196037:

For 99-06 Twin Cam (except 06 Dyna Glide)

Part # DS-196177, DS-196178, DS-196182, & DS-196183:

For 86-18 XL & 94-08 Buell (except 1125R)

NOTE: 1.6 and 2.0 starters will require spacer block PART # DS-196233 when used on 99-06 FLT models. On Softail, Dyna and FXR models, you must relocate oil lines and some wiring.

NOTE: PART #DS-196182 has a raw finish starter nose.

Model:
Quantity:
Add To Cart