Roland Sands Design - TRACK 2-INTO-1 EXHAUST SYSTEMS

Screen Shot 2017-10-31 at 5.27.37 PM.png
Screen Shot 2017-10-31 at 5.28.15 PM.png
Screen Shot 2017-10-31 at 5.27.37 PM.png
Screen Shot 2017-10-31 at 5.28.15 PM.png

Roland Sands Design - TRACK 2-INTO-1 EXHAUST SYSTEMS

779.99
  • Roland Sands Design has taken their original Tracker pipe and decreased the weight, improved performance and simplified the tip to create this new system

  • Mild steel header and heat shields with billet end cap

  • Race-quality, high-temperature black ceramic coating

  • Redesigned baffle for deeper tone; mono filament fiberglass and stainless steel wool packing

  • Black Ops system features a matte black exhaust with gloss black heat shields and tip

  • Chrome system features a matte black exhaust with chrome heat shields and tip

  • Manufactured from beginning to end by Vance & Hines in Southern California

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.

NOTE: Not for use on models with saddlebags.

NOTE: Not for use with passenger footpegs.

NOTE: Emissions Notice at the bottom of page

COLOR:

  • Black

  • Natural

CONFIGURATION 1: 2 into 1

END CAP COLOR:

  • Natural

  • Black

END CAP FINISH:

  • Chrome

  • Powder-Coated

END CAP STYLE: Straight

FINISH:

  • Ceramic

  • Chrome

  • Black Ops

HEAT SHIELD: Yes

MADE IN THE U.S.A.: Yes

MATERIAL:

  • Aluminum

  • Steel

MODEL: Track

PACKAGING: Each

SHAPE:Megaphone

SLIP-ON: No

SPECIFIC APPLICATION: Yes

STYLE: Performance Replacement

TYPE: Exhaust System

Applications:

2005 15th Anniversary Fat Boy-Injected Model, 2011- 2013 Blackline Models, 2008 - 2011 Cross Bones Models, 2005 - 2017 Deluxe Models, 2000 - 2006 Deuce Models, 1990 - 2017 Fat Boy Models, 2012 - 2017 FLS Slim Models, 1986 - 2017 Heritage Models, 1986 - 2010 & 2016 - 2017 Softail Models

IMPORTANT INFORMATION

EMISSIONS AND NOISE REGULATIONS

NOTE:  The California Air Resources Board (“CARB”) and/or the Environmental Protection Agency (“EPA”) does not permit the use of aftermarket emissions-related part(s) that alter the performance of OEM emissions-related devices unless carb has issued an Executive Order, other than on racing vehicles on closed courses.  Check your local laws and manufacturer’s information.  More California exhaust information is available at www.arb.ca.gov/.

NOTE:  Aftermarket products, including but not limited to exhausts, catalytic converters, oxygen sensors, fuel/air controller modules, air filter kits, camshafts, O2 eliminators, and carburetors and jet kits which alter, modify, or replace emission control devices or systems of an originally compliant highway motorcycle, are not legal for sale or street use in California unless they have been issued a CARB Executive Order.  Aftermarket emissions-related products which have not been issued an Executive Order or which are not aftermarket Replacement Parts, as defined in Title 13, California Code of Regulations, Section 1900(b)(2), are authorized for closed circuit race use only.  Products shown may be designed, manufactured, intended and sold for closed circuit race use only and use of the same on public roads or lands may be a violation of local, state and/or federal laws.  See manufacturer’s information and state and local laws to determine what is authorized for your use on your vehicle.

The following emissions-related defined terms are used on this website (PARTS WITH THE FOLLOWING DESIGNATIONS ON THIS WEBSITE ARE NOT ILLEGAL FOR SALE IN CALIFORNIA UNDER CARB REGULATIONS):

  • “CARB E.O.” means the specified Executive Order issued by CARB. An Executive Order constitutes an exemption by CARB from CA Vehicle Code 27156 and 38391, for sale of the part number for the make/model/year fitment(s) specified in the Executive Order.

  • “Replacement Part” means any aftermarket part intended to replace an original equipment emissions-related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part.

  • “Qualified Manufacturer Declared Replacement Part” means any aftermarket part intended to replace an original equipment emissions-related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label.  This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.

NOTE:  Products shown may not conform to federal, state or local emissions and/or noise regulations.

Model:
Quantity:
Add To Cart