Thunder Max - THUNDERMAX ECM WITH INTEGRAL AUTO TUNE SYSTEM

Screen Shot 2018-06-12 at 1.06.49 PM.png
Screen Shot 2018-06-12 at 1.16.39 PM.png
Screen Shot 2018-06-12 at 1.06.49 PM.png
Screen Shot 2018-06-12 at 1.16.39 PM.png

Thunder Max - THUNDERMAX ECM WITH INTEGRAL AUTO TUNE SYSTEM

from 117.95

ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness

  • Utilizes wide-band O2 sensors and works as a closed-loop control system to continuously self-adjust and properly tune the motorcycle's air/fuel ratio for all riding conditions

  • Easy installation: replace the factory ECM, install new O2 sensors and harness, load the correct map for your bike, and ride

  • Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two wide-band sensors, TMax software and communication USB cable, Quick-Start Easy Install and Comprehensive User's Manual, technical support and free software and updates

  • Hundreds of maps available to download for your bike (based on model, engine size, exhaust system air cleaner, pistons, cams, etc.) – load the map of your choice and the integral auto-tune will do the rest

  • Improves throttle response, exhaust sound and driveability

  • Does not require dyno tuning

  • Rider can adjust idle speed, rev limit and speedometer calibration

  • Adjustable front and rear cylinder AFR maps, ignition timing (spark) maps, and startup maps

  • Works with all popular exhaust systems and is compatible with high-performance camshafts

  • Supports turbo, nitrous and supercharger applications

  • Software program allows live monitoring, recording and examination of diagnostic codes and datalogs including number of starts, engine temperature and rpm operation

  • New maps, software, firmware updates, map analysis and tech support available online at no charge

  • Made in the U.S.A.

Applications:

Part # 1020-2664:

For 17-18 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLHTCUTG/FLRT

Part # 1020-0836:

For 08-13 FLHT/FLHR/FLHX/FLTR, 09-13 H-D FL Trike

Part # 1020-1848:

For 11 FXS/FLST

Part # 1020-1851:

For 01-10 FXST/FLST, 02-07 FLHT/FLHR/FLHX/FLTR, & 07-09 XL

Part # 1020-1853:

For 02-17 V-Rod

Part # 1020-2118:

For 14-16 FLHT/FLHR/FLHX/FLTR & 14-15 FLSTNSE

Part # 1020-2360:

For 12-15 FXS/FLS/FLST, 12-17 FXD/FLD/FXDWG (Except FXDLS), & 14-18 XL

Part # 1020-2361:

For 08-10 FXCW/C, 04-11 FXD/FXDWG, 09 SE Softail, 10-13 XL, & 08-12 ZR1200/X (Includes Mini USB Pigtail)

Part # 1020-2382:

For 15-18 XG500/750

Part # 1020-2795:

For 18 FLST/FXST

Part # 1022-0039:

Replace 18mm O2 Sensor

NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their O2 sensor port bungs.

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.

Model:
Quantity:
Add To Cart